Hoodies - Front
Portrait / 280x280mm

How to set and supply your artwork correctly
1. Select: Layers Tool:     (F7) > Select: Artwork (place here) layer.
Create/Add your design to the Artwork layer.
2. Once your design is complete, please remove the Guide layer.
Failure to remove will result in the guide layer printing over your artwork design.
3. Export to: Adobe PDF (Print) (PC: ctrl+ E / Mac: cmd+E).
Please ensure when exporting to a PDF file you select ‘pages’:

• Accepted format: Adobe PDF (Print). Ideally: PDF/X-4a: 2001 (one file)
• Colour: CMYK (RGB and Pantones will be converted)
• Fonts: Embedded or converted to outlines
• Image Resolution: 300dpi to 450dpi
Please note: Any areas set to ‘White’ will print. If you require transparent areas (e.g. so that the t-shirt material shows through) please ensure these are set to  ‘no fill’. We position the print area approximately 50mm from the neck line.

Finished Size - This is the size of your printed area.

Safe Area - We recommend keeping text and important content out of the grey area.

Bleed - Please extend your artwork into this section. This is to avoid white or unprinted edges when trimmed to finished size.