WEBVTT

00:00:00.541 --> 00:00:01.083
(transition thuds)

00:00:01.083 --> 00:00:02.486
(logo dings)

00:00:03.291 --> 00:00:06.041
Glassbreak Sensors are programmed to listen for the

00:00:06.041 --> 00:00:08.583
specific frequency of windows breaking.

00:00:08.666 --> 00:00:12.000
They're even sensitive enough to know
the difference between a plate breaking

00:00:12.000 --> 00:00:13.500
and a window breaking.

00:00:13.500 --> 00:00:15.541
The sensor listens for the initial thump

00:00:15.541 --> 00:00:17.625
against the pane glass being struck,

00:00:17.625 --> 00:00:19.208
which wakes the sensor.

00:00:19.208 --> 00:00:23.583
Then the sound of the glass breaking
micro-seconds later triggers the alarm.

00:00:23.666 --> 00:00:27.791
The Glassbreak Sensor is only designed
to work with single and double-paned glass,

00:00:27.875 --> 00:00:31.875
and it's not intended for use
with laminated or anti-smash glass.

00:00:31.958 --> 00:00:33.166
Before getting started,

00:00:33.166 --> 00:00:36.708
you'll need to have your Gen 3
Base Station already installed.

00:00:36.791 --> 00:00:39.458
You'll also need to have your own
Phillips head screwdriver

00:00:39.458 --> 00:00:41.833
if you plan on wall-mounting the sensor.

00:00:41.833 --> 00:00:44.166
To add your Glassbreak Sensor to your system,

00:00:44.250 --> 00:00:47.916
open the SimpliSafe Mobile App
on your phone or tablet.

00:00:48.000 --> 00:00:51.750
Navigate to the three-bar menu
in the upper left corner of the app,

00:00:51.833 --> 00:00:54.833
then select Add Device or Camera.

00:00:54.958 --> 00:00:56.375
On this next screen,

00:00:56.375 --> 00:00:59.708
select Glassbreak from the list of available products.

00:00:59.791 --> 00:01:04.125
Then follow the onscreen instructions
to add the device to your system.

00:01:09.833 --> 00:01:13.333
Next, let's consider the placement of
your Glassbreak Sensor.

00:01:13.333 --> 00:01:17.375
We recommend to placing it within 20
feet of the window you want to protect.

00:01:17.458 --> 00:01:19.416
If your window has heavy curtains,

00:01:19.416 --> 00:01:23.375
you may want to place the sensor
a little closer at 5-10 feet away instead.

00:01:23.875 --> 00:01:25.750
You can place it on a flat surface

00:01:25.750 --> 00:01:28.625
or wall mount it using the adhesive or screws.

00:01:28.708 --> 00:01:31.500
If you're wall mounting the
sensor using the adhesive,

00:01:31.500 --> 00:01:35.375
we recommend wiping the surface
with an alcohol based cleaning solution,

00:01:35.458 --> 00:01:38.166
then allowing for time to dry
before mounting.

00:01:38.166 --> 00:01:41.166
Once dry, remove the strip from the adhesive,

00:01:41.166 --> 00:01:45.416
then press and hold the sensor
to the surface for 30 seconds.

00:01:50.625 --> 00:01:54.125
If you plan on securing your sensor
using the included screws,

00:01:54.208 --> 00:01:58.166
slide the mounting plate up
and off the sensor using light force.

00:01:58.250 --> 00:02:01.500
Use a Philips head screwdriver
to mount the plate to the wall,

00:02:01.583 --> 00:02:05.166
then, slide the Glassbrake Sensor
back onto its bracket.

00:02:10.208 --> 00:02:11.166
And that's it.

00:02:11.166 --> 00:02:14.625
Your Glassbreak Sensor is now
set up and ready to use.

00:02:14.708 --> 00:02:17.875
If you want to learn more
about customizing or testing your sensor,

00:02:18.083 --> 00:02:21.250
visit us at support.simplisafe.com

00:02:24.500 --> 00:02:25.333
(transition thuds)

00:02:25.333 --> 00:02:26.500
(logo dings)