WEBVTT

00:00:04.708 --> 00:00:08.291
Test Mode is a way for you to test
that your SimpliSafe security system

00:00:08.291 --> 00:00:09.666
is working properly,

00:00:09.666 --> 00:00:12.666
and that all of your sensors
and components are connected.

00:00:12.750 --> 00:00:14.041
In this video,

00:00:14.041 --> 00:00:17.125
we'll walk you through the process
of placing your Simplisafe system

00:00:17.125 --> 00:00:19.916
into Test Mode, by using your Keypad.

00:00:20.166 --> 00:00:25.500
You can place your system into Test Mode
at any time, by following these steps.

00:00:25.583 --> 00:00:28.375
Press Menu on your Keypad.

00:00:28.375 --> 00:00:30.458
Enter your Master PIN.

00:00:31.250 --> 00:00:35.916
Scroll and select Test Mode
by pressing the edges of your screen.

00:00:36.000 --> 00:00:37.708
You will know you are in Test Mode

00:00:37.708 --> 00:00:39.750
when you see the circle on your Keypad

00:00:39.833 --> 00:00:43.750
with the text: “Test each device
by pressing its button”

00:00:43.833 --> 00:00:45.750
and your Base Station says:

00:00:45.750 --> 00:00:47.208
“Entering Test Mode.

00:00:47.291 --> 00:00:50.375
You may now begin testing each device
by pressing its button.”

00:00:55.083 --> 00:00:57.791
If you have monitoring,

00:00:57.833 --> 00:01:01.208
putting your system into Test Mode
will automatically send a Test Signal

00:01:01.208 --> 00:01:02.833
to the Monitoring Service.

00:01:02.916 --> 00:01:04.166
You will get a phone call

00:01:04.166 --> 00:01:07.375
which will confirm
that the connection is working properly.

00:01:07.458 --> 00:01:09.916
If you do not answer this call,
don't worry,

00:01:09.916 --> 00:01:11.083
you'll get a voicemail,

00:01:11.166 --> 00:01:14.166
but it will not result in dispatch.

00:01:14.291 --> 00:01:17.833
You can also confirm that the Test Signal
was received by Monitoring,

00:01:18.041 --> 00:01:21.750
by checking your Timeline via
the SimpliSafe app.

00:01:21.833 --> 00:01:26.916
You should see a new entry with a
timestamp of when you initiated the test.

00:01:27.000 --> 00:01:28.916
While your system is in Test Mode,

00:01:28.916 --> 00:01:31.250
you can test each sensor individually

00:01:31.250 --> 00:01:33.125
to make sure they are working properly.

00:01:33.208 --> 00:01:37.125
To test your CO Detectors,
press the Test/Mute button

00:01:37.333 --> 00:01:40.166
on the front of the Carbon
Monoxide Detector.

00:01:40.166 --> 00:01:43.166
The unit will chirp loudly
for several seconds.

00:01:43.291 --> 00:01:45.250
The Base Station will also announce:

00:01:45.250 --> 00:01:47.750
“Carbon Monoxide Detector”.

00:01:51.416 --> 00:01:53.375
After you've tested your devices,

00:01:53.375 --> 00:01:56.750
press the left arrow to exit Test Mode.

00:01:57.458 --> 00:02:01.250
If you need more additional assistance,
please visit the address on screen.