WEBVTT

00:00.416 --> 00:00.958
(transition thuds)

00:00.958 --> 00:01.541
(logo dings)

00:02.000 --> 00:06.666
The Water Sensor takes a single
CR-2032 Lithium 3V battery

00:06.916 --> 00:10.458
and has a life expectancy of up
to five years, depending on usage.

00:10.791 --> 00:12.791
To change your Water Sensor’s battery,

00:12.791 --> 00:15.416
twist the bottom and top
apart using light force.

00:16.083 --> 00:18.750
Depending on what version of the
Water Sensor you have,

00:18.750 --> 00:21.416
there are different steps
for changing the battery.

00:21.416 --> 00:24.125
If your Water Sensor battery
does not have a cover on it,

00:24.125 --> 00:27.333
simply press on the retaining
clip and pop the battery out,

00:27.333 --> 00:28.791
and replace it with a new one.

00:29.250 --> 00:31.875
If your Water Sensor battery does
have a cover on it,

00:31.875 --> 00:33.541
you'll need to use a small tool,

00:33.541 --> 00:36.666
such as a smaller flathead
screwdriver to pop the cover off.

00:37.166 --> 00:40.166
Once the cover has been removed,
replace the battery,

00:40.416 --> 00:44.208
then slide the cover back into place
with the exclamation point facing up

00:44.416 --> 00:47.333
and press down near the tool
slot until you hear a click

00:47.375 --> 00:47.833
(click)

00:47.833 --> 00:49.583
To reseal the Water Sensor,

00:49.583 --> 00:51.958
align the arrows on the
interior of the sensor

00:51.958 --> 00:54.625
to ensure that the grooves
are aligned properly.

00:54.791 --> 00:56.083
Once they are aligned,

00:56.083 --> 00:59.416
twist the Water Sensor shut
to create a seal on the device.

01:00.666 --> 01:02.583
If you require further assistance,

01:02.750 --> 01:06.083
visit us at support.simplisafe.com.

01:09.958 --> 01:10.500
(transition thuds)

01:10.500 --> 01:11.083
(logo dings)