WEBVTT

00:00:04.791 --> 00:00:08.375
Test Mode is a way for you to test
that your SimpliSafe security system

00:00:08.375 --> 00:00:09.750
is working properly,

00:00:09.750 --> 00:00:12.750
and that all of your sensors
and components are connected.

00:00:12.833 --> 00:00:14.125
In this video,

00:00:14.125 --> 00:00:17.208
we'll walk you through the process
of placing your Simplisafe system

00:00:17.208 --> 00:00:20.000
into Test Mode, by using your Keypad.

00:00:20.250 --> 00:00:25.583
You can place your system into Test Mode
at any time, by following these steps.

00:00:25.666 --> 00:00:28.458
Press Menu on your Keypad.

00:00:28.458 --> 00:00:30.541
Enter your Master PIN.

00:00:31.333 --> 00:00:36.000
Scroll and select Test Mode
by pressing the edges of your screen.

00:00:36.083 --> 00:00:37.791
You will know you are in Test Mode

00:00:37.791 --> 00:00:39.833
when you see the circle on your Keypad

00:00:39.916 --> 00:00:43.833
with the text: “Test each device
by pressing its button”

00:00:43.916 --> 00:00:45.833
and your Base Station says:

00:00:45.833 --> 00:00:47.291
“Entering Test Mode.

00:00:47.375 --> 00:00:50.458
You may now begin testing each device
by pressing its button.”

00:00:55.166 --> 00:00:57.781
If you have monitoring,

00:00:57.916 --> 00:01:01.291
putting your system into Test Mode
will automatically send a Test Signal

00:01:01.291 --> 00:01:02.916
to the Monitoring Service.

00:01:03.000 --> 00:01:04.250
You will get a phone call

00:01:04.250 --> 00:01:07.458
which will confirm
that the connection is working properly.

00:01:07.541 --> 00:01:10.000
If you do not answer this call,
don't worry,

00:01:10.000 --> 00:01:11.166
you'll get a voicemail,

00:01:11.250 --> 00:01:14.250
but it will not result in dispatch.

00:01:14.375 --> 00:01:17.916
You can also confirm that the Test Signal
was received by Monitoring,

00:01:18.125 --> 00:01:21.833
by checking your Timeline via
the SimpliSafe app.

00:01:21.916 --> 00:01:27.000
You should see a new entry with a
timestamp of when you initiated the test.

00:01:27.083 --> 00:01:29.000
While your system is in Test Mode,

00:01:29.000 --> 00:01:31.333
you can test each sensor individually

00:01:31.333 --> 00:01:33.208
to make sure they are working properly.

00:01:34.541 --> 00:01:36.583
Here’s how to test
your Extra Siren,

00:01:36.583 --> 00:01:40.083
Water, and Temperature/Freeze Sensors:

00:01:40.208 --> 00:01:43.083
Press the Test Button
on the top of each sensor.

00:01:43.083 --> 00:01:46.750
Listen for the Base Station to
say the sensor name, to confirm:

00:01:46.750 --> 00:01:47.875
“Freeze Sensor”.

00:01:51.625 --> 00:01:53.583
After you've tested your devices,

00:01:53.583 --> 00:01:56.958
press the left arrow to exit Test Mode.

00:01:57.666 --> 00:02:01.916
If you need more additional assistance,
please visit the address on screen.