WEBVTT 00:00:02.958 --> 00:00:06.166 Here's what you need to know about using the solar panel accessory 00:00:06.166 --> 00:00:08.083 for your outdoor camera. 00:00:08.541 --> 00:00:10.875 When your outdoor camera is powered by a solar panel, 00:00:11.166 --> 00:00:14.791 it can keep running without the need to remove and recharge its battery. 00:00:16.208 --> 00:00:18.625 With as little as three hours of sunlight a day, 00:00:18.958 --> 00:00:21.666 the solar panel can keep your outdoor camera charged. 00:00:22.291 --> 00:00:26.750 This guide will tell you how to install the solar panel accessory for your outdoor camera. 00:00:28.000 --> 00:00:30.583 Because of the solar panel's 13 foot cord, 00:00:30.750 --> 00:00:34.125 it doesn't need to be mounted directly next to the outdoor camera, 00:00:34.125 --> 00:00:36.000 adding extra convenience. 00:00:37.208 --> 00:00:39.666 To install the solar panel, you'll need: 00:00:39.666 --> 00:00:41.083 a handheld screwdriver, 00:00:41.416 --> 00:00:43.166 a power drill, as optional, 00:00:43.166 --> 00:00:45.208 and a a one quarter inch masonry drill bit 00:00:45.208 --> 00:00:49.375 if you’re planning to install it on brick, stucco, concrete or stone. 00:00:49.375 --> 00:00:51.958 All other parts needed, including anchors, 00:00:51.958 --> 00:00:54.625 screws and a wire management Velcro strap 00:00:54.625 --> 00:00:56.375 are included with the solar panel. 00:00:56.625 --> 00:00:59.750 First, find the right location for your solar panel. 00:01:00.166 --> 00:01:03.708 This should be a place that receives at least three hours of sunlight a day. 00:01:04.458 --> 00:01:08.583 To mount the solar panel on brick, stucco, concrete or stone, 00:01:08.833 --> 00:01:12.250 start by making the holes for the mount where you want to install. 00:01:12.958 --> 00:01:15.875 Remove the mount and drill three holes into the surface 00:01:15.875 --> 00:01:17.875 with a quarter inch masonry drill bit. 00:01:18.791 --> 00:01:21.041 Then use the included anchors and screws 00:01:21.041 --> 00:01:23.291 to attach the solar panel to the wall. 00:01:23.666 --> 00:01:26.458 On wood surfaces, you don't need to drill holes. 00:01:26.875 --> 00:01:30.000 Simply screw the self-tapping screws directly into the wall 00:01:30.000 --> 00:01:31.166 using a screwdriver. 00:01:31.583 --> 00:01:34.416 Next, attach the solar panel to the mount. 00:01:34.791 --> 00:01:36.458 Tighten the lock ring on the mount. 00:01:37.375 --> 00:01:39.708 Align the threads on the back of the solar panel 00:01:39.708 --> 00:01:41.250 to the threaded post on the mount 00:01:41.541 --> 00:01:44.208 Rotate the solar panel clockwise until tight. 00:01:44.541 --> 00:01:47.875 Then twist the nut on the mount counter-clockwise to tighten. 00:01:48.333 --> 00:01:52.583 Once attached, you can adjust the position and angle of the solar panel. 00:01:53.125 --> 00:01:55.166 Loosen the lock ring and adjust. 00:01:55.750 --> 00:01:57.666 When the solar panel position and angle 00:01:57.666 --> 00:01:59.375 are facing the direction of the sun, 00:01:59.625 --> 00:02:03.083 re-tighten the lock ring so it remains in the desired position. 00:02:03.625 --> 00:02:05.166 If not done previously, 00:02:05.333 --> 00:02:07.541 secure the excess length of the power cord 00:02:07.541 --> 00:02:09.875 by wrapping it around the base of the solar panel 00:02:10.041 --> 00:02:14.000 and securing it firmly with the included velcro wire management strap. 00:02:15.166 --> 00:02:18.083 Finally, connect the cable to your outdoor camera. 00:02:19.125 --> 00:02:22.375 Ensure the cable has been fully inserted into the rear of the camera 00:02:22.375 --> 00:02:23.833 to prevent water damage. 00:02:24.625 --> 00:02:27.916 If you need to troubleshoot your solar panel after it's been set up, 00:02:28.250 --> 00:02:31.666 Here are a few quick steps you can take to get things up and running again: 00:02:32.375 --> 00:02:35.625 make sure to charge the outdoor camera battery for at least six hours 00:02:35.625 --> 00:02:37.166 before its first use. 00:02:37.750 --> 00:02:41.125 The solar panel is meant to maintain power in a charged battery, 00:02:41.375 --> 00:02:42.958 not charge it from a low level, 00:02:43.166 --> 00:02:45.708 so this initial battery charge is important. 00:02:46.666 --> 00:02:49.791 Another potential fix for solar panel or camera issues 00:02:50.000 --> 00:02:52.666 is to make sure the battery has been inserted properly. 00:02:53.458 --> 00:02:56.166 The solar panel won't work if the camera has no battery 00:02:56.458 --> 00:02:58.250 or is inserted incorrectly. 00:02:58.500 --> 00:03:02.541 You can also try securing the connection between the solar panel and camera 00:03:02.666 --> 00:03:04.916 by unplugging the cable and reinserting it. 00:03:05.375 --> 00:03:09.291 In some cases, the solar panel may not be receiving enough direct sun. 00:03:10.208 --> 00:03:11.208 In these cases, 00:03:11.500 --> 00:03:14.375 reorient the panel so it's not blocked by buildings, 00:03:14.375 --> 00:03:16.750 trees, debris, or anything else. 00:03:17.916 --> 00:03:21.250 You can also clean the panel to make sure it's not obstructed by dirt. 00:03:22.041 --> 00:03:25.500 Finally, verify that the temperature around the solar panel 00:03:25.500 --> 00:03:29.208 is between 32 degrees and 120 degrees Fahrenheit. 00:03:29.666 --> 00:03:33.625 The device is designed to charge batteries only within that temperature range. 00:03:34.208 --> 00:03:37.583 If your solar panel is installed correctly and receiving enough sun, 00:03:38.083 --> 00:03:39.916 you can make sure it's working as intended 00:03:39.916 --> 00:03:43.416 by checking your outdoor camera settings page in the SimpliSafe App. 00:03:44.375 --> 00:03:45.250 And that's it. 00:03:45.916 --> 00:03:51.125 Your SimpliSafe solar panel is set to continuously power your SimpliSafe outdoor camera. 00:03:52.166 --> 00:03:55.583 If you have any further questions, visit the site on screen.