WEBVTT

00:00:00.000 --> 00:00:01.125
(transition thuds)

00:00:01.125 --> 00:00:01.875
(logo dings)

00:00:03.791 --> 00:00:07.541
Testing your SimpliSafe Smoke
and Carbon Monoxide Detector

00:00:07.541 --> 00:00:11.708
is a good way to ensure that the sensor
is connected to the rest of your system

00:00:11.708 --> 00:00:13.500
and working as intended.

00:00:13.583 --> 00:00:16.583
First, place your system into Test Mode.

00:00:16.791 --> 00:00:19.791
Do this on your SimpliSafe Keypad
by pressing Menu,

00:00:19.958 --> 00:00:23.833
entering your Primary PIN,
then selecting Test Mode,

00:00:26.250 --> 00:00:28.583
A circle will appear on your Keypad screen

00:00:28.583 --> 00:00:32.666
with the text: Test each device
by pressing its button.

00:00:32.666 --> 00:00:35.541
Your Base Station will also
give a verbal confirmation

00:00:35.541 --> 00:00:37.250
that you have entered Test Mode.

00:00:37.250 --> 00:00:38.416
“Entering Test Mode.”

00:00:38.416 --> 00:00:41.833
The SimpliSafe Dispatch Center
will make an automated call

00:00:41.833 --> 00:00:45.541
to indicate that your system
successfully sent a test signal.

00:00:45.625 --> 00:00:48.125
It's okay if you don't answer this call

00:00:48.125 --> 00:00:51.083
as dispatch will not occur as a result of it.

00:00:51.083 --> 00:00:54.625
A timestamped event will appear
within the SimpliSafe app.

00:00:54.708 --> 00:00:58.750
Also notating that you've
successfully entered Test Mode.

00:00:58.833 --> 00:01:03.000
Now it's time to test your
Smoke and Carbon Monoxide Detector.

00:01:03.083 --> 00:01:06.750
Go to the unit and press
and hold the button on the front.

00:01:06.833 --> 00:01:10.041
The device will admit a loud chirp
to indicate that it is on

00:01:10.041 --> 00:01:11.916
and working as intended.

00:01:11.916 --> 00:01:15.208
Your Base Station will also
verbally confirm that you've tested

00:01:15.208 --> 00:01:17.375
your Smoke and Carbon Monoxide Detector:

00:01:17.375 --> 00:01:19.375
“Smoke, Carbon Monoxide Detector”

00:01:19.375 --> 00:01:22.583
confirming that the system is sending
and receiving signals.

00:01:23.250 --> 00:01:25.000
After you've tested devices,

00:01:25.041 --> 00:01:28.625
press left on the Keypad’s
rocker to exit Test Mode.

00:01:28.708 --> 00:01:31.541
This will return your
system to normal operations.

00:01:34.416 --> 00:01:35.541
(transition thuds)

00:01:35.541 --> 00:01:36.291
(logo dings)