WEBVTT

00:00.500 --> 00:01.041
(transition thuds)

00:01.041 --> 00:01.625
(logo dings)

00:02.666 --> 00:07.333
The Entry Sensor takes a single
CR-2032 Lithium 3V battery

00:07.541 --> 00:11.083
and has a life expectancy of up
to five years, depending on usage.

00:11.541 --> 00:13.625
To change your Entry Sensors battery,

00:13.625 --> 00:16.291
first locate the test button
on the device.

00:16.291 --> 00:17.666
This may be on the top,

00:17.666 --> 00:20.875
bottom, or side of the sensor
depending on your placement of it.

00:21.416 --> 00:25.333
Apply even pressure into the sensor
and slide it toward the test button

00:25.333 --> 00:26.791
and off its bracket.

00:26.791 --> 00:29.666
Depending on what version
of the Entry Sensor you have,

00:29.666 --> 00:32.458
there are different steps
for changing the battery.

00:32.458 --> 00:35.375
If your Entry Sensor battery
does not have a cover on it,

00:35.375 --> 00:37.583
simply press on the retaining clip

00:37.583 --> 00:40.166
and pop the battery out and
replace it with a new one.

00:40.750 --> 00:43.416
If your Entry Sensor battery
does have a cover on it,

00:43.416 --> 00:45.125
you'll need to use a small tool,

00:45.125 --> 00:48.291
such as a smaller flathead screwdriver
to pop the cover off.

00:49.041 --> 00:52.041
Once the cover has been removed,
replace the battery,

00:52.500 --> 00:56.291
then slide the cover back into place
with the exclamation point facing up,

00:56.666 --> 00:59.583
and press down near the tool slot
until you hear a click in either scenario.

00:59.583 --> 01:00.041
(click)

01:00.416 --> 01:01.583
In either scenario,

01:01.791 --> 01:03.708
once the battery has been replaced,

01:03.708 --> 01:06.208
slide the Entry Sensor
back onto its bracket.

01:06.833 --> 01:08.708
If you require further assistance,

01:08.708 --> 01:11.708
visit us at support.simplisafe.com.

01:14.958 --> 01:15.500
(transition thuds)

01:15.500 --> 01:16.083
(logo dings)