WEBVTT

00:00:02.333 --> 00:00:08.541
The Glassbreak Sensor takes a single
CR 123A Lithium 3 volt battery,

00:00:08.541 --> 00:00:11.833
and has a life expectancy of
up to three years,

00:00:12.000 --> 00:00:14.166
depending on placement and usage.

00:00:14.333 --> 00:00:16.625
To change your Glassbreak Sensor’s battery,

00:00:16.625 --> 00:00:20.333
slide the front part of the device up
and toward the pairing button

00:00:20.583 --> 00:00:22.625
to remove it from its bracket.

00:00:23.083 --> 00:00:25.500
You may need to use light pressure or force

00:00:25.500 --> 00:00:27.583
to press the front of the sensor in

00:00:27.583 --> 00:00:29.416
and then slide it toward the button.

00:00:30.208 --> 00:00:32.750
If your sensor is not wall mounted,

00:00:32.750 --> 00:00:34.333
you can hold it in your hands

00:00:34.458 --> 00:00:36.875
with the front of your sensor
facing your palms.

00:00:37.041 --> 00:00:39.791
Then, slide the back cover or bracket off

00:00:39.958 --> 00:00:41.791
and away from the pairing button.

00:00:42.500 --> 00:00:44.833
Once the backing plate has been removed,

00:00:44.916 --> 00:00:45.916
replace the battery.

00:00:46.750 --> 00:00:49.750
Then, slide the sensor back onto its bracket.

00:00:50.666 --> 00:00:54.083
If your sensor is still offline
after taking these steps,

00:00:54.291 --> 00:00:57.458
you may need to remove it
and add it back to your system.

00:00:58.333 --> 00:01:01.333
You can learn more about these steps
on our Help Center

00:01:01.500 --> 00:01:05.541
and within the How to Replace
Glassbreak Sensor Battery guide.

00:01:06.416 --> 00:01:07.750
Need further assistance?

00:01:07.958 --> 00:01:11.458
Visit us at support.simplisafe.com.