WEBVTT

00:00:04.750 --> 00:00:08.333
Test Mode is a way for you to test
that your SimpliSafe security system

00:00:08.333 --> 00:00:09.708
is working properly,

00:00:09.708 --> 00:00:12.708
and that all of your sensors
and components are connected.

00:00:12.791 --> 00:00:14.083
In this video,

00:00:14.083 --> 00:00:17.166
we'll walk you through the process
of placing your Simplisafe system

00:00:17.166 --> 00:00:19.958
into Test Mode, by using your Keypad.

00:00:20.208 --> 00:00:25.541
You can place your system into Test Mode
at any time, by following these steps.

00:00:25.625 --> 00:00:28.416
Press Menu on your Keypad.

00:00:28.416 --> 00:00:30.500
Enter your Master PIN.

00:00:31.291 --> 00:00:35.958
Scroll and select Test Mode
by pressing the edges of your screen.

00:00:36.041 --> 00:00:37.750
You will know you are in Test Mode

00:00:37.750 --> 00:00:39.791
when you see the circle on your Keypad

00:00:39.875 --> 00:00:43.791
with the text: “Test each device
by pressing its button”

00:00:43.875 --> 00:00:45.791
and your Base Station says:

00:00:45.791 --> 00:00:47.250
“Entering Test Mode.

00:00:47.333 --> 00:00:50.416
You may now begin testing each device
by pressing its button.”

00:00:55.125 --> 00:00:57.791
If you have monitoring,

00:00:57.875 --> 00:01:01.250
putting your system into Test Mode
will automatically send a Test Signal

00:01:01.250 --> 00:01:02.875
to the Monitoring Service.

00:01:02.958 --> 00:01:04.208
You will get a phone call

00:01:04.208 --> 00:01:07.416
which will confirm
that the connection is working properly.

00:01:07.500 --> 00:01:09.958
If you do not answer this call,
don't worry,

00:01:09.958 --> 00:01:11.125
you'll get a voicemail,

00:01:11.208 --> 00:01:14.208
but it will not result in dispatch.

00:01:14.333 --> 00:01:17.875
You can also confirm that the Test Signal
was received by Monitoring,

00:01:18.083 --> 00:01:21.791
by checking your Timeline via
the SimpliSafe app.

00:01:21.875 --> 00:01:26.958
You should see a new entry with a
timestamp of when you initiated the test.

00:01:27.041 --> 00:01:28.958
While your system is in Test Mode,

00:01:28.958 --> 00:01:31.291
you can test each sensor individually

00:01:31.291 --> 00:01:33.166
to make sure they are working properly.

00:01:33.250 --> 00:01:36.125
Here’s how to test
your Entry Sensors:

00:01:36.125 --> 00:01:39.250
open and close protected
doors and windows.

00:01:39.500 --> 00:01:41.416
Listen for the Base Station to say:

00:01:41.416 --> 00:01:43.750
“Entry Sensor”, to confirm.

00:01:48.166 --> 00:01:50.125
After you've tested your devices,

00:01:50.125 --> 00:01:53.500
press the left arrow to exit Test Mode.

00:01:54.208 --> 00:01:58.458
If you need more additional assistance,
please visit the address on screen.