WEBVTT

00:02.583 --> 00:05.583
In the event of an emergency
at your home or business,

00:05.625 --> 00:09.333
you can trigger an alarm by pressing
the Panic Button down for two seconds.

00:09.750 --> 00:12.958
You'll know the Panic Button
was successful when the LED on the

00:12.958 --> 00:15.125
upper right hand corner flashes red.

00:15.500 --> 00:17.666
When subscribed to professional monitoring,

00:17.875 --> 00:20.916
the Panic Button sends a signal
to our monitoring centers,

00:21.125 --> 00:24.125
alerting our agents of the alarm
at your location.

00:24.166 --> 00:26.916
You can configure your Panic Button
to sound the alarm,

00:27.166 --> 00:31.666
or you can opt for other settings
such as Silent Alarm, Fire, or Medical

00:31.666 --> 00:35.750
to ensure that you get the right
emergency response tailored to your needs.

00:36.250 --> 00:40.083
Once installed, the Panic Button
will always be active and ready for use,

00:40.291 --> 00:43.125
no matter the state your SimpliSafe® System is armed in.

00:43.541 --> 00:44.916
Ready to get started?

00:45.208 --> 00:49.500
First, we'll add the Panic Button to your
existing Gen 3 SimpliSafe® System.

00:49.916 --> 00:53.208
To do this, open the SimpliSafe®
app on your phone or tablet.

00:53.791 --> 00:57.291
Navigate to the three bar menu
on the upper left corner of the screen

00:57.791 --> 01:00.375
and select 'Add Device or Camera'.

01:00.375 --> 01:04.583
On the next screen, select 'Panic Button'
from the list of available devices.

01:05.250 --> 01:09.083
Then, follow the on-screen instructions
to add the sensor to your system.

01:10.000 --> 01:13.000
Next, you'll want to find a location
for your Panic Button.

01:13.625 --> 01:17.750
Many of our customers choose to install
it near their bed, such as against a wall.

01:18.291 --> 01:20.958
You can install it anywhere within your home or business

01:20.958 --> 01:22.750
where you may want some extra security.

01:23.208 --> 01:26.875
We recommend that you avoid putting
the Panic Button within children's reach.

01:27.541 --> 01:28.708
Wherever you place it,

01:28.708 --> 01:33.250
we recommend adhering it to a wall
so it doesn't get lost or pressed accidentally.

01:33.833 --> 01:36.666
Once you've chosen a location
for your Panic Button,

01:36.666 --> 01:40.791
you'll need to decide if you're mounting
it using the adhesive or included screws.

01:41.375 --> 01:44.500
Whether you're mounting the device
using the adhesive or screws,

01:44.666 --> 01:48.875
we recommend cleaning the surface with
an alcohol based solution or a damp towel,

01:49.083 --> 01:52.583
and allowing the surface to fully dry
before adhering it to the surface.

01:52.958 --> 01:56.708
Once the surface has had time to dry,
remove the adhesive backing

01:56.708 --> 01:59.791
and press and hold the Panic Button
to the surface for 30 seconds.

02:00.208 --> 02:02.916
Be careful not to press
the button on the device,

02:02.916 --> 02:05.666
as this could trigger
an alarm for your system.

02:05.666 --> 02:08.666
If you're mounting the Panic Button
using the included screws,

02:08.833 --> 02:12.416
you'll need your own Phillips head
screwdriver to complete the installation.

02:12.833 --> 02:15.833
Simply slide the Panic Button
off the mounting plate,

02:15.833 --> 02:19.500
then secure the mounting plate
to your wall using the included screws.

02:19.916 --> 02:22.625
Once the mounting plate
has been attached to the surface,

02:22.958 --> 02:26.708
slide the Panic Button back onto it
carefully until it clicks into place.

02:27.291 --> 02:28.416
And that's it.

02:28.416 --> 02:31.416
Your Panic Button is now set up
and ready to use.

02:31.750 --> 02:34.375
Want to learn more about
how your Panic Button responds

02:34.375 --> 02:37.166
during an alarm or how
to customize it settings?

02:37.375 --> 02:40.291
Visit us at support.simplisafe.com