WEBVTT

00:00:00.166 --> 00:00:01.041
(transition thuds)

00:00:01.041 --> 00:00:02.166
(logo dings)

00:00:02.875 --> 00:00:05.625
The Smart Alarm Wireless
Indoor Security Camera

00:00:05.625 --> 00:00:09.666
is a wireless security camera
that's designed for indoor use.

00:00:09.750 --> 00:00:12.166 line:10%
It records at 1536p

00:00:12.166 --> 00:00:15.666 line:10%
and has a wide field of view
at 125 degrees.

00:00:15.750 --> 00:00:17.333 line:10%
The Smart Alarm Indoor Camera

00:00:17.333 --> 00:00:20.166
can also last up to three months
on a single charge,

00:00:20.166 --> 00:00:24.125
or be always wired so you never
have to worry about charging.

00:00:24.208 --> 00:00:25.416
Included in the box

00:00:25.416 --> 00:00:28.041
is the Smart Alarm Indoor
Camera with mount,

00:00:28.041 --> 00:00:31.291
a USB charging cable
and mounting hardware.

00:00:31.375 --> 00:00:32.625
Before getting started,

00:00:32.625 --> 00:00:34.958
you'll need to charge your Smart
Alarm Indoor Camera

00:00:34.958 --> 00:00:40.291
with a USB adapter capable of at least
a 5-volt, 7.5-watt output,

00:00:40.291 --> 00:00:42.416
such as the SimpliCam adapter.

00:00:42.500 --> 00:00:46.375
Most standard mobile device or tablet
adapters should also work.

00:00:46.458 --> 00:00:49.333
The camera can take up to 6 hours
to fully charge,

00:00:49.333 --> 00:00:52.833
however you can set it up
while plugged in to power and charging.

00:00:52.916 --> 00:00:55.250
You'll also need your own Philips
head screwdriver

00:00:55.250 --> 00:00:57.875
if you plan on mounting the camera
on a wall.

00:00:57.875 --> 00:00:59.416
Ready to get started?

00:00:59.416 --> 00:01:03.166
Open the SimpliSafe
Mobile App on your phone or tablet.

00:01:03.250 --> 00:01:07.083
Tap the three bar menu in the upper left
corner of the app.

00:01:07.166 --> 00:01:11.000
Select Add Device or Camera,

00:01:11.083 --> 00:01:13.041
followed by Cameras.

00:01:13.041 --> 00:01:16.958
Then choose the Smart Alarm Indoor Camera
from the list of available cameras,

00:01:17.166 --> 00:01:20.166
and follow the in-app
steps to add it to your system.

00:01:20.416 --> 00:01:23.416
The app will guide you
to connect your camera to your system,

00:01:23.458 --> 00:01:26.291
connect it to Wi-Fi and adjust settings.

00:01:26.291 --> 00:01:27.625
You can visit our Help Center

00:01:27.625 --> 00:01:31.583
for a list of Wi-Fi requirements
and additional troubleshooting steps.

00:01:31.666 --> 00:01:33.000
The setup flow will help you

00:01:33.000 --> 00:01:36.000
find the optimal placement in your home
or business.

00:01:36.041 --> 00:01:39.833
We recommend a spot that covers the area
you want to capture activity in,

00:01:40.000 --> 00:01:43.708
but avoids pointing the camera
directly at a doorway or window.

00:01:43.791 --> 00:01:48.166
The motion detector within the camera is
most sensitive to side to side movement,

00:01:48.250 --> 00:01:52.041
so look for a spot where a subject
would walk across the field of view.

00:01:57.291 --> 00:02:01.166
Now you’re ready to physically install
your Smart Alarm Indoor Camera.

00:02:01.375 --> 00:02:03.833
There are two ways you can have it set up:

00:02:03.833 --> 00:02:05.041
mounted on a wall

00:02:05.041 --> 00:02:07.250
or on the edge of a table or shelf.

00:02:07.333 --> 00:02:09.291
If mounting the camera on a wall,

00:02:09.291 --> 00:02:12.875
we recommend having it at a height
of 6 to 7 feet off the ground

00:02:12.875 --> 00:02:15.458
and tilted down at about 20 degrees.

00:02:15.500 --> 00:02:19.166
If you have larger pets at this location
or cannot wall mount your camera,

00:02:19.333 --> 00:02:22.208
we recommend placing it about
four feet off the ground

00:02:22.208 --> 00:02:23.875
at the edge of a shelf or table,

00:02:23.875 --> 00:02:25.500
without any tilt.

00:02:25.583 --> 00:02:28.958
You can choose the material of the wall
that you're installing the camera on

00:02:28.958 --> 00:02:31.666
within the app for specific instructions.

00:02:31.666 --> 00:02:35.166
We'll show you the best steps
based on a drywall installation.

00:02:35.250 --> 00:02:39.375 line:10%
If you're mounting on stone or brick,
you'll need to use the included wall anchors,

00:02:39.375 --> 00:02:45.250
along with your own 3/16th inch drill
bit to make pilot holes for the anchors.

00:02:50.666 --> 00:02:53.625
Let's get started with
the drywall installation.

00:02:53.625 --> 00:02:57.666
Hold the plate to the wall
and mark the top keyhole with a pencil.

00:02:57.750 --> 00:03:02.625
Partially insert the screw into the marked
spot using a Phillips head screwdriver.

00:03:02.708 --> 00:03:07.291
Place the wall plate back over the screw
and gently slide it into place.

00:03:07.375 --> 00:03:10.250
Secure the wall plate
by tightening the top screw,

00:03:10.250 --> 00:03:12.541
then installing the second screw.

00:03:12.541 --> 00:03:14.666
The wall plate should be installed vertically

00:03:14.666 --> 00:03:17.875
and securely, so it can't move from side to side.

00:03:17.958 --> 00:03:22.041
Be sure not to over tighten it
or have it installed at an angle.

00:03:22.125 --> 00:03:25.583
Slide your camera over the mounting plate
until it clicks into place.

00:03:25.583 --> 00:03:26.250
(click)

00:03:26.333 --> 00:03:30.750
Use the multi-pivot mount
to angle the camera down 20 degrees.

00:03:30.833 --> 00:03:34.791
Note that the camera cannot be mounted
upside down or on its side.

00:03:34.875 --> 00:03:37.875
Doing so can result in
inaccurate motion detection

00:03:38.041 --> 00:03:40.666
and lead to overall poor performance.

00:03:46.541 --> 00:03:49.583
Finish any remaining steps from
the in-app set up flow,

00:03:49.583 --> 00:03:50.791
and that's it.

00:03:50.875 --> 00:03:55.208
Your Smart Alarm Indoor
Camera is now set up and ready to use.

00:03:55.291 --> 00:03:56.791
You can customize your camera

00:03:56.791 --> 00:04:01.041
by using the camera settings page
within the SimpliSafe Mobile App.

00:04:01.125 --> 00:04:03.583
If you have any questions or need assistance,

00:04:03.583 --> 00:04:06.583
visit us at support.simplisafe.com

00:04:09.750 --> 00:04:10.833
(transition thuds)

00:04:10.833 --> 00:04:12.083
(logo dings)